Dynacycle Oil, created in 2003, is a biker owned and operated oil manufacturer, located in central New Jersey, and they have a BIG product for 4-stroke engines. Their product, Dynacycle Oil, is a top quality semi-synthetic 20W-50 Engine and Transmission Oil specifically formulated for V-Twin and XL engines although it can be used in all 4-stroke air and water cooled engines that require a 20W-50 motor oil. Dynacycle Oil is guaranteed to reduce engine temperature up to 50�F thus extending piston and bearing life. It's friction reducing formula increases oil pressure, horsepower, torque, and gas mileage! With your engine running cooler and an increase in oil pressure and horsepower, you will increase your MPG. In today's economy that means more money in your pocket, not in your tank! BETTER PROTECTION: Dynacycle Oil also has one of the best "Wear Ball Test" numbers in the industry with a 0.31, which beats the top 5 selling motorcycle oils on the market today. Years of independent testing has proven over and over that Dynacycle Oil will reduce friction and engine wear a minimum of 50%. TESTING: SIMON'S DYNORUN TEST Simons Competition of Fairless Hills, PA., formerly Simon's Performance Center of Penndel, PA., is one of the most respected Harley-Davidson performance tuning shops in the country. Owner Andy Simon, Sr. started drag-racing Harley-Davidsons in 1993, and by the end of that year, he was ranked #2 in the World and held the E.T. and M.P.H. World Record. For the next two years in 1994 and 1995, Andy Simon, Sr. shocked the world of Harley-Davidson drag-racing by winning two back-to-back World Championships, and breaking his own World Record in both E.T. and M.P.H. at almost every single event. Andys success in drag-racing turned into a full time career, and in the spring of 1995, Andy Simon, Sr. opened his shop to focus on one thing: Performance! With their wealth of experience in tuning, its safe to say that the guys at Simons know a thing or two about building top notch racing motors for the street and for the track. And Simons trusts Dynacycle oil to provide the lubrication required for these demanding applications! Simons conducted a series of tests on their Dynojet 250 dynamometer, using a Stage 1 H-D Sportster 1200 as a mule. The objective was to find out how Dynacycle Oil performed when compared to a popular conventional 20W-50 oil sold by Revtech. The results were as follows: Oil Brand- - - - - - Revtech- - - - Dynacycle Horsepower >>>> 60.3- - - - - - -63.8 Torque>>>>>>>>63.3- - - - - - -67.1 Room Temp>>>>>>81- - - - - - - - 84 Barometer>>>>>>30.1- - - - - - 30.02 Humidity>>>>>>>29%- - - - - -29.50% Just by changing to Dynacycle Oil, Simons unleashed 3.5 more horsepower (a 5.8% gain) and 3.8 more pounds of torque (a 6.0% gain). Further, in back-to-back road testing following the dyno run, the Sportster mule netted 4.3 more miles per gallon (a 9.5% increase) and ran 18 degrees cooler (on a 10 degree hotter day) compared to the baseline testing with Revtech conventional oil. OIL SPEC's: Dynacycle Oil exceeds all manufacturers spec's and will NOT void manufacturers warranties. STANDARDS: API SM/CI-4, SH, SG, CF, CD, JASO MA, CG-4 Dynacycle Oil is MANUFACTURED in the USA!!! FIND A DEALER: http://dynacycleoil.com/locator.html DEALERS WANTED: Check our website at http://dynacycleoil.com/dealerinfo.html or call us at (732) 605-9003
16 Willow St, # B, Jamesburg, NJ 08831,
31.17 mi